Watch strap with quick-release pins – Fits without tools

• Measure the inside distance between the two watch lugs where the strap will be fitted.
• If the distance is 20 mm, choose a 20 mm strap. If the distance is 22 mm, choose a 22 mm strap.
• The width is printed on the underside of some existing watch straps. Check this before ordering when possible.
• Select your preferred material, size and colour from the menu on the product page.

Good to know

The 20 or 22 mm measurement refers to the width of the strap where it attaches to the watch, not the circumference of your wrist.

Colours may appear differently depending on the screen and lighting. Please look at all the images of your chosen option.

1. Place the watch face down on a soft towel or cloth.
2. Remove the old strap. If it does not have quick-release pins, you may need a watch strap tool.
3. Check which part of the new strap should be fitted to each side of the watch.
4. Place one end of the spring bar into the hole in one of the watch lugs.
5. Slide the small lever on the underside of the strap to one side to shorten the spring bar.
6. Position the strap between the watch lugs and release the lever when the other end of the spring bar is correctly aligned.
7. Check that the spring bar is securely seated in both holes.
8. Fit the other part of the strap in the same way.
9. Gently pull both parts before wearing the watch to make sure the strap is secure.