Has the fabric above your toes worn through, or is a hole beginning to appear near your little toe? Cover the damage with a self-adhesive shoe patch and keep wearing your shoes for longer.
The patches are designed for holes and wear in the fabric or textile upper of the shoe.
You can apply a patch to the outside of the shoe to cover the damage directly. You can also apply it from the inside to reinforce the fabric behind the hole and make the repair less visible. For an extra durable repair, place one patch on each side of the hole.
You receive six self-adhesive patches in different sizes. They are made from soft microfibre and can be applied without sewing.
If the fabric has started to become thin but has not yet developed a hole, you can reinforce the area before it breaks. In this case, it is best to apply the patch directly to the inside of the shoe.
- Make sure the surface is clean and completely dry.
- Choose a patch that covers the entire damaged area with some overlap.
- Check the position while the backing paper is still attached. Decide whether to apply the patch to the outside, inside or both sides of the hole.
- Peel back a small section of the backing paper from the edge of the patch. Avoid touching the adhesive.
- Position the exposed adhesive on the correct spot and press it into place.
- Gradually pull away the rest of the backing paper while smoothing the patch onto the shoe.
- Press firmly across the entire patch, paying particular attention to the edges. If the patch is on the inside, hold your hand against the outside of the shoe to provide counter-pressure.
- You can use the shoes straight away, but if possible, leave the repair undisturbed for 24 hours.



















Good quality and easy to apply.
Works
Would’ve preferred if they were all in the largest size and not mixed. I only need large ones for my shoes…