Roller blind chain connectors

1. Locate the two ends of the chain.
2. Place one ball from each end into the connector slots.
3. Check that both balls are positioned correctly.
4. Click the cover firmly into place.

The chain is then reconnected and ready to use again.

The connector is designed for commonly used blind chains with standard-sized balls.

The balls should measure approximately 4.5 mm in diameter. Measure the ball itself – not the space between the balls or the total width of the chain.

The connector can be used with beaded chains on roller blinds, vertical blinds and other window coverings with a corresponding chain.

The connector can be used both to repair a chain that has broken and to reconnect a chain after it has been shortened.

Check that the finished length will work with the blind mechanism before shortening the chain.

The connector is slightly larger and more rigid than the rest of the chain.

On some blinds, it may therefore be unable to pass through the chain wheel or mechanism. Position the connector so that it can move freely without becoming caught.

What is included?

• 10 connectors for beaded blind chains
• Fits standard chain balls measuring approximately 4.5 mm in diameter