Hinge plate – Repair a cabinet door

1. Remove the hinge.
2. Position the plate over the damaged area.
3. Check that the opening and holes align with the hinge position.
4. Screw the plate to the door or cabinet frame.
5. Attach the hinge to the plate.
6. Check that the door opens and closes correctly.
7. Tighten the screws securely, but not so tightly that the cabinet material is damaged.

The plate is designed for common cup hinges, but screw-hole positions can vary between models and manufacturers. Before buying, compare the screw holes on your hinge with the hole pattern shown in the product images. If the pre-drilled holes do not align, the plate can often be adapted by drilling new holes with a suitable metal drill bit.

Size: 8 × 9 cm

Material: stainless steel Large round opening for the hinge cup

Can be fitted to the door or cabinet frame

The plate is suitable for kitchen cupboards, bathroom cabinets, wardrobes and other furniture with a corresponding hinge.

The hinge plate reinforces the area where the hinge is fitted. It does not replace a bent, cracked or worn hinge. Check that the plate will fit and cover the damaged area. A drill bit suitable for stainless steel is required if new holes need to be made.

What is included?

• 1 hinge repair plate
• 6 screws