Hot and Cold Water Stickers – for Taps and Mixer Taps
£ 7.90
- Self-adhesive marking for hot and cold water
- For taps, mixer taps, showers and washbasins
- Raised 3D feel and glossy surface
In stock
Description
Has the hot and cold water marking become unclear, worn or disappeared completely? These self-adhesive stickers make it easy to mark taps, mixer taps, shower controls or other surfaces where it should be clear which side is hot and which is cold.
The stickers have a smooth, glossy surface and a slightly raised 3D feel that is both visible and easy to feel with your fingertips. A small detail that makes everyday use clearer – especially on older mixer taps, in bathrooms, utility rooms, guest toilets, holiday homes or other places where the marking is missing.
They are easy to apply to a clean and dry surface and work best on smooth materials. The result is a clear and neat marking without having to replace the whole tap or mixer.
Size and contents
- Self-adhesive stickers for hot and cold water
- Raised 3D feel
- Smooth and glossy surface
- Water-resistant
- Best suited to clean, dry and smooth surfaces
The stickers are useful where the hot and cold water marking is missing, worn away or hard to see.
Use them on, for example:
- Taps
- Mixer taps
- Shower controls
- Washbasins
- Kitchen sinks
- Utility rooms
- Guest toilets
- Holiday homes
- Boats, caravans or other places where clear marking is needed
- Clean the surface where the sticker will be placed. The surface should be dry and free from dirt, grease and limescale.
- Use a little rubbing alcohol or another suitable cleaner for the best adhesion.
- Remove the thin protective film.
- Carefully lift the sticker from the backing. Avoid touching the adhesive side.
- Place the sticker where you want it.
- Press firmly with your thumb so the whole sticker makes contact with the surface.
Good to know
The stickers adhere best to smooth, clean and dry surfaces. Adhesion may be weaker on uneven, limescaled, greasy or dirty surfaces.
Avoid moving the sticker several times after fitting, as the adhesive may lose strength.
This is a simple solution when you want to make an existing tap or mixer tap clearer, without replacing the whole part.
Additional information
| Weight | 0.0103 kg |
|---|
Reviews
There are no reviews yet