Iron-on Reflectors – Stylish Reflectors for Clothing

Ironing on reflectors is quick and easy, with a result that looks professional and is long-lasting. These high-quality reflectors provide excellent visibility from a distance. Choose your design from the menu and purchase by the metre. All reflectors are 5 cm wide, except for designs like Zigzag, Paws, Hearts, Small Hearts, Dog Bones, Chevron and Stars, which are approximately 2.5 cm wide.

Reflectors with exciting possibilities!

The creative options are nearly endless. These iron-on reflectors are perfect for backpacks, hats, jackets, and more. Cut, test, and design your own patterns. We recommend testing on a small area before full application. Follow the instructions below for the best results.

How to apply iron-on reflectors:

1. If your reflector has a blue protective film, remove it first (this side goes face down on the fabric)
2. Position the reflector where you want it
3. Place a thin cotton cloth (ideally baking paper) on top of the reflector
4. Set the iron to medium heat (2 dots), no steam
5. Press evenly for 8–20 seconds – the goal is for the reflector to adhere to the fabric and allow the carrier sheet to release
6. Let it cool slightly, then slowly peel away the carrier at a 180° angle
7. If the reflector lifts with the carrier, repeat step 5
8. Place the cloth back over the reflector (now without the carrier) and press again for a few more seconds to secure it permanently
9. Done!

* Sticks very well to cotton and many synthetic materials – but not on impregnated or waterproof surfaces (e.g. many brand-new outerwear items).

Always test on a hidden spot first to ensure adhesion.

Follow care instructions for your garment for the best outcome.

Note: This is not a certified personal reflector and does not replace lights or large reflective surfaces.